Epson BrightLink 1480Fi, User Manual, Page: 56 / 386

56
Depending on your Epson document camera model, do one of the following to connect the document
camera to your projector:
• For the Epson DC-07 document camera, locate the USB cable that came with the camera and
connect it to the projector's port and to the document camera's USB Type B port.
• For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to
the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-12 document camera, connect it to the projector's HDMI , Computer , or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-13 document camera, connect it to the projector's HDMI , Computer , or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-20 document camera, connect it to the projector's HDMI , Computer , or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-21 document camera, connect it to the projector's HDMI , Computer , or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
Note: For additional features supported by software, connect your document camera to your computer
instead of the projector. See the document camera manual for details.
Parent topic: Projector Connections
Connecting a Printer to the Control Pad
You can connect an Epson printer or all-in-one device to the USB-A port on the control pad (BrightLink
1485Fi) and use it to print your projected and annotated content. Make sure the printer meets the control
command requirements.
Note: You can connect a wireless printer by selecting Network Printer as the Print > Printer setting in
the Interactive menu.
1. Connect a USB cable to one of the USB-A ports on the projector and to the USB-B port at the top of
the control pad.
2. Connect another USB cable to the USB-A port on the bottom of the control pad. Make sure the cable
is no longer than 16.4 ft (5 m).
3. Connect the other end of the cable to the USB Type B port on the printer.
Parent topic: Projector Connections