Epson BrightLink 1480Fi User Manual Download Page 39

Page: 39 / 386

Parent topic:

Projector Placement

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.

Loosen both of the screws securing the cable cover and lift off the cable cover.

To attach the cable cover, replace the cable cover and tighten the cable cover screws.

Parent topic:

Setting Up the Projector

Projector Connections

See these sections to connect the projector to a variety of projection sources.

Caution:

If you will use the projector at altitudes above 4921 feet (1500 m), turn on

High Altitude Mode

to ensure the projector's internal temperature is regulated properly.

Summary of Contents for BrightLink 1480Fi



































































































































































































































































































































































































Search results

Summary of Contents for BrightLink 1480Fi

Reviews:

Epson BrightLink 1480Fi, User Manual, Page: 39 / 386

Search results

Summary of Contents for BrightLink 1480Fi

Reviews: