Epson BrightLink 1480Fi Page 331 User Manual Download

Page: 331 / 386

331

On/Standby
light

Status light

Laser light Temp light

Status and solution

Off

Flashing blue

Off

Orange

Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:

• Make sure that the vents and air

filter are not clogged with dust or
obstructed by nearby objects.

• Make sure the environmental

temperature is not too hot.

• Clean or replace the air filter.

• If operating the projector at high

altitude, turn on

High Altitude

Mode

• If the problem persists, unplug the

projector and contact Epson for
help.

Flashing blue

Varies

Flashing
orange

Varies

Laser warning. Turn the projector off,
unplug it, and contact Epson for help.

Off

Flashing blue

Orange

Off

Laser has a problem. Turn the
projector off, unplug it, and contact
Epson for help.

Off

Flashing blue

Off

Flashing
orange

A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.

Off

Flashing blue

Flashing
orange

Off

Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.

Varies

Flashing blue

Flashing
orange

Varies

Refresh Mode is in progress.

Summary of Contents for BrightLink 1480Fi



































































































































































































































































































































































































Search results

Summary of Contents for BrightLink 1480Fi

Reviews:

Related manuals for BrightLink 1480Fi

Brands by name

Popular brands

Epson BrightLink 1480Fi, User Manual

Search results

Summary of Contents for BrightLink 1480Fi

Reviews:

Related manuals for BrightLink 1480Fi

Brands by name

Popular brands