Epson BrightLink 1480Fi, User Manual, Page: 213 / 386

213
Note: You can change the function of the button by changing the Pen Button Function setting in
the Interactive menu.
• To use the pen as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the button on the side or press and hold the pen on the screen.
Note: To make a long press of the pen act as a right-click on a Mac or PC, set the Pen Tracking
Mode setting to Mouse Mode and set the Press and Hold setting to Right Click .
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
Note: You can turn off the hovering feature using the Pen Hovering setting in the projector's
Pen/Touch menu.
Parent topic: Using the Interactive Pens
Related references
Pen and Touch Setup Settings - Pen/Touch Menu
Interactive Settings - Interactive Menu
Pen Calibration
Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate
the first time you use your projector's interactive features. Calibration results remain until you calibrate
again.