Epson BrightLink 1480Fi, User Manual, Page: 198 / 386

198
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Connect a USB cable to your projector's USB-B1 port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release
the
Menu button.
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk.
Note: Do not copy any other files to the removable disk.
7. Once the file has copied, do one of the following:
• Windows: Open the My Computer , Computer , Windows Explorer , or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject .
• Mac: Drag the removable disk icon for your projector from the desktop into the trash.
Various projector lights start flashing to indicate that the projector's settings are being updated.
When the lights stop flashing, remove the USB cable from the projector. The projector enters
standby mode.
Caution: Do not unplug the power cord while the lights are flashing. This could damage the
projector.