111
4.
If the number in the
Number of Scans
field exceeds the number displayed as the
Life Cycle
of the
rollers, it is time to replace the rollers.
5.
Close the Epson Scan 2 Utility.
Parent topic:
Cleaning and Transporting Your Scanner
Replacing the Scanner Rollers
Replace the scanner rollers when the number of scans exceeds the life cycle of the rollers. Check the
scanner roller counter to see when you need to replace the rollers.
Note:
Frequent use of textured media may cause premature wear on the rollers. If frequent paper jams
occur before the life cycle of the rollers is exceeded, try cleaning the rollers. In some cases, the rollers
may need to be replaced before the number of scans exceeds the life cycle of the rollers.
1.
Turn off the scanner.
2.
Unplug the AC adapter.
3.
Disconnect any connected cables.
4.
Pull down on the cover open lever and open the scanner cover.
Summary of Contents for B11B259201
