44
You see a screen like this:
4.
Do one of the following:
• Under
Search for Network
, select the IP address of your Epson Network Interface Unit and click
Add
.
• Select the
Enter address
setting, type in the IP address or host name of your Epson Network
Interface Unit, and click
Add
.
5.
Click
OK
to save your settings and then close Epson Scan 2 Utility.
Parent topic:
Using the Network Interface Unit
Scanning to Network Computers from the Network Interface Unit - Windows
You can scan to a network computer directly from the Epson Network Interface Unit (Windows). You first
set up a scan job in Document Capture Pro and then select the computer you want to send the scanned
file to.
Summary of Contents for B11B236201
