manualshive.com logo in svg

Epson B107011F - GT 10000, User Manual

Share
Download
Epson B107011F - GT 10000 User Manual Download Page 61

55

Chapter 5

Network Scanning

Before you can use the EPSON GT-10000 as a network scanner, your computers 
must be configured and operational on an existing network with TCP/IP Protocol 
installed. Then you can use the EPSON Scan Server and EPSON TWAIN Pro 
Network software applications on your scanner software CD-ROM to share your 
scanner with other users in a small workgroup.

Your scanner network must have a scanner server (the Windows computer connected 
to the scanner) and at least one or more client computers. Only one client computer 
can access the scanner at a time. However, you can have more than one scanner and 
scanner server on a network, so clients can choose which scanner to use.

Your system must meet these minimum requirements for sharing a scanner:

■

The network computer that you use as the scanner server must be an 
IBM-compatible computer running Windows 98, Windows 95, or 
Windows NT 4.0 (Windows NT 4.0 with Service Pack 3 is recommended).

■

Client computers must run Windows 98, Windows 95, or Windows NT  4.0.

■

Both the client computers and the scanner server must have a network interface 
card installed, and must be running the TCP/IP Protocol. (See Appendix A, 
“Installing the TCP/IP Protocol,” for instructions.)

■

The network computer that you use as the scanner server must have EPSON Scan 
Server installed. EPSON TWAIN Pro Network must be installed on client 
computers to access the scanner over the network.

shallot.book  Page 55  Thursday, January 27, 2000  9:59 PM

Summary of Contents for B107011F - GT 10000






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands