B-300/B-500DN
User’s Guide
Using the Control Panel
82
Status and error messages
This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
The table below contains error messages, a brief description of each message and suggestions for
correcting the problem.
Message
Description
Cancel
The print job is canceled.
Charging ink
The printer is charging the ink.
Cleaning
The printer is cleaning the print head.
Please wait
The printer is starting.
The printer is initializing the settings.
Printing
The printer is processing data.
Ready
The printer is ready to print.
Power save
The printer is in the power save mode.
Power off
The printer is shutting down.
Message
Problem Solutions
Service call see guide
Service call error occurs.
Turn off the printer and then back on. If
the error does not clear, contact Epson
Service Center.
&
See “Epson Service Center” on page
Printer near end of service
life
Parts inside the printer are at the end of
their service life.
Contact Epson Service Center to
replace them.
&
See “Epson Service Center” on page
Nozzle maint error see
guide
Print head nozzles are clogged or
misaligned.
Perform the nozzle check and print
head cleaning.
&
&
See “Cleaning the Print Head” on
Press the
OK
button to recover from
error status.