After printing is finished, the printer returns to the Test print menu.
Entering the password
When you want to set or change the password from Password menu, or press the
r
Right button to
enter Menu mode after the LCD panel is locked, you need to enter the password.
Follow the instructions below to enter the password.
Note:
If the current password is the factory default, just press the
OK
button to proceed.
1. Press the
d
Down
or
u
Up
button to display the character you want to select.
2. Press the
r
Right
button to determine the character.
3. Repeat steps 1 and 2.
4. Once all characters are set, press the
OK
button.
B-310N/B-510DN User’s Guide
Using the Control Panel
133