Using the Printer on a Network
114
Chapter 9
Using the Printer on a Network
Setting Up the Printer on a Network (for B-508DN Users only)
This printer can connect anywhere on your network using 10Base-T or 100Base-TX because it has a
built-in Ethernet interface that supports the TCP/IP protocol.
You can make network interface settings such as IP address by using the printer’s control panel, or
the applications for your computer.
Using the printer’s control panel
&
See “Network setting menu” on page 79.
&
See also “How to access the control panel menus” on page 77.
Using the utilities for your computer
&
See the network guide on the CD-ROM.
Setting up your computers to use the printer
Make sure you have connected the printer to your network as described on the
Start Here
sheet.
Then follow the steps below for every computer on the network that will print to the B-508DN.
1. Insert the Software CD-ROM in the CD-ROM drive.
With Windows Vista, if you see the AutoPlay window, click
Run EPSETUP.EXE
. When you
see the User Account Control screen, click
Continue
.