The status of the Num Lock, Caps Lock, and Scroll Lock indicators is
shown on the upper right side of the keyboard layout.
These messages appear on the screen:
KEYBOARD CHECK
Press Y followed by ENTER to exit.
Press N followed by ENTER if screen and keyboard
do not match.
If al1 the keys function correctly and match the characters displayed, press Y
and then
Enter.
If a11 the keys function, but the characters displayed do not match the
keys,
press
Y and
then
Enter.
Then reselect the keyboard test from the
DEVICE LIST,
and check that you selected the correct keyboard layout.
You can find diagrams of all the international keyboard layouts in the
MS-DOS manual.
If any key is incorrect, press
N
and
Enter.
Make a copy of the error code
and message, or print them out, and contact your Epson dealer.
Monochrome Display Adapter and CRT Check
Use this option to check the operation of a monochrome display adapter
and monitor. This test includes several checks that allow you to identify
particular problems related to the monochrome display. To run this check,
DIP switches 1 - 5 and 1-6 on the front panel must be set correctly for a
monochrome monitor.
You can select the individual checks from this menu:
MONOCHROME ADAPTER AND CRT CHECK MENU
1
- Monochrome adapter check
3
2 - Attribute check
- Character set check
4 - Video check
5 - Sync check
6 - Run all above checks
0 -
Exit
Enter selection number:
5-8
