Epson AL-MX200 Series User Manual Download

Page: 45 / 410

Assigning an IP Address (for IPv4 Mode)

Note:

❏

When you assign an IP address manually in

IPv6

mode, use EpsonNet Config. To display EpsonNet

Config, use the link local address. To check a link local address, see “Printing and Checking the
System Settings Page” on page 48.

❏

Assigning an IP address is considered as an advanced function and is normally done by a system
administrator.

❏

Depending on the address class, the range of the IP address assigned may be different. On Class A, for
example, an IP address in the range from

0.0.0.0

127.255.255.255

will be assigned. For

assignment of IP addresses, contact your system administrator.

You can assign the IP address by using the operator panel or the Printer Setting Utility.

Using the Operator Panel

1. Turn on the printer.

Ensure that the LCD panel shows

Select Function

2. On the operator panel, press the

System

button.

3. Select

Admin Menu

, and then press the button.

4. Select

Network

, and then press the button.

5. Select

TCP/IP

, and then press the button.

6. Select

IPv4

, and then press the button.

7. Select

Get IP Address

, and then press the button.

8. Select

Panel

, and then press the button.

9. Press the

(

Back

) button, and then ensure that

Get IP Address

is selected.

10. Select

IP Address

, and then press the button.

11. Enter the value of the IP address using the numeric keypad.

12. Press the button.

AL-MX200 Series User’s Guide

Printer Connection and Software Installation

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands

Epson AL-MX200 Series, User Manual

Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands