manualshive.com logo in svg

Epson AL-MX200 Series, User Manual

Share
Download
Epson AL-MX200 Series User Manual Download Page 186

Note:

Preview

 is grayed out and disabled when you select 

Document Feeder Tray

 from 

Scan From

.

7. Select the desired properties from the 

Image Quality

 and 

Image Options

 tabs.

8. Click 

Scan

 to start scanning.

A scanned image file is generated.

Using the WIA Driver

Your printer also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is
one of the standard components provided with Windows XP and later operating systems and works
with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan an
image and easily manipulate it without using additional software.

The following procedure uses Windows 7 as an example.

Note:

Ensure that the printer is connected to the computer using the USB cable.

1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in

first; or place a single document face down on the document glass and close the document cover.

See Also:

❏

“Making Copies From the Automatic Document Feeder (ADF)” on page 165

AL-MX200 Series     User’s Guide

Scanning     

186

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands