Epson AL-MX200 Series User Manual Download

Page: 178 / 410

4. Select the desired setting, and then press the

button.

Off

Makes regular one-to-one copies of the source documents.

Auto

Automatically reduces the size of the source documents to print all of them
on a single sheet of paper.

ID Card Copy

Prints both sides of the ID card on a single sheet of paper in the original
size.

Manual

Reduces the size of the source documents according to the

Reduce/

Enlarge

setting and print all of them on a single sheet of paper.

Factory default menu setting

5. If necessary, customize other copy options including the number of copies, copy size (only for

Off

Manual

), and image quality.

6. Press the

(

Start

) button to begin copying.

When you are using the document glass and

Multiple Up

is set to

Auto

ID Card Copy

, or

Manual

, the LCD panel displays a prompt for another page. Select

Yes

, and then press the

button.

If you have selected

Yes

, select

Continue

Cancel

, and then press the

button.

Margin Top/Bottom

You can specify the top and bottom margins of the copy.

1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in

first; or place a single document face down on the document glass and close the document cover.

See Also:

❏

“Making Copies From the Automatic Document Feeder (ADF)” on page 165

❏

“Making Copies From the Document Glass” on page 163

2. Press the (

Copy

) button.

3. Select

Margin Top/Bottom

, and then press the

button.

AL-MX200 Series User’s Guide

Copying

178

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands

Epson AL-MX200 Series, User Manual

Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands