Epson AL-MX200 Series User Manual Download

Page: 111 / 410

3. Select the

Printer

menu.

4. Select

Set As Default

5. Select whether to set this printer as the system-wide default printer, and then click

Specifying Printing Options

You can specify printing options such as the duplex (2-sided) printing.

For Red Hat Enterprise Linux 6 Desktop (x86)

1. Open the URL “http://localhost:631” using a web browser.

2. Click

Administration

3. Click

Manage Printers

4. Click the queue name for which you want to specify printing options.

5. Click the

Administration

drop down box, and then select

Modify Printer

6. Specify necessary printing options, and then click

Continue

Modify Printer

The message

Printer EPSON AL-MX200 X has been modified successfully.

appears.

The setting is complete.

For SUSE Linux Enterprise Desktop 11 (x86)

1. Open a web browser.

2. Enter “http://localhost:631/admin” in the address bar, and then press the

Enter

key.

The

CUPS

window appears.

Note:

Set the password for authority as the printer administrator before setting the printer queue. If you
have not set it, see “Setting the Password for Authority as the Printer Administrator” on
page 112.

AL-MX200 Series User’s Guide

Printer Connection and Software Installation

111

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands

Epson AL-MX200 Series, User Manual

Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands