Epson AL-M300 Series User Manual Download Page 40

Page: 40 / 225

Lower paper cassettes

Printer driver settings

Paper Size

A4, A5, A6

, B5, LT, HLT, LGL, GLT, GLG, EXE, F4

Paper Source

Cassette 1, Cassette 2

, Cassette 3

*2 *3

, Cassette 4

*2 *3

Paper Type

Thick (for 106 to 163 g/m² paper), Extra Thick (for 164 to 216 g/m² paper)

Available only for Cassette 1.

Available only when the optional paper cassette unit is installed.

Available only for AL-M400 Series.

Note:

❏

Duplex printing is not available for Extra Thick.

❏

If performing manual duplex (2-sided) printing, ensure that the paper is not curled.

Custom paper size

Available paper source

❏

MP tray

❏

Lower paper cassettes

Printer driver settings

MP tray

Printer driver settings

Paper Size

User Defined Size

Paper Source

MP Tray

Paper Type

Plain, Semi-Thick, Preprinted, Letterhead, Recycled, Color, Labels, Thick, Extra
Thick, Special

76.2

127 mm at minimum and 215.9

355.6 mm at maximum.

AL-M300/AL-M400 Series User's Guide

Printing Tasks

Summary of Contents for AL-M300 Series


































































































































































































































Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands

Epson AL-M300 Series, User Manual

Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands