![Epson AL-M220DN User Manual Download Page 97](http://html.mh-extra.com/html/epson/al-m220dn/al-m220dn_user-manual_108703097.webp)
The edges of texts and/or images are not smooth
Cause
What to do
The Print Quality is set to
Fast
.
Change the Print Quality setting to
Fine
.
The printer does not print normally via the USB interface
Cause
What to do
For Windows users only
The Data Format setting in the printer’s Properties is
not set to
ASCII
or
TBCP
.
The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure that the Data Format
setting, which is accessed by clicking
Advanced
on the PostScript
sheet of the printer’s Properties, is set to
ASCII
or
TBCP
.
If your computer is running Windows Vista, Vista x64, XP, XP x64, click
the
Device Settings
tab in the printer’s Properties, then click the
Output Protocol
setting and select
ASCII
or
TBCP
.
For Mac OS users only
The print setting in the application is set to binary
encoding.
The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure that the print setting in
the application is set to ASCII encoding.
The printer does not print normally via the network interface
Cause
What to do
For Windows users only
The Data Format setting is different from the data
format setting specified in the application.
If the file is created in an application that allows you to change the
data format or encoding, such as Photoshop, make sure that the
setting in the application matches that in the printer driver.
For Windows users only
The print data is too large.
Click
Advanced
on the PostScript sheet of the printer’s Properties,
then change the Data Format setting from
ASCII
data (default) to
TBCP
(Tagged binary communications protocol).
When the
Binary
setting is set to
On
, TBCP is not available. Use the
Binary protocol. See
For Windows users only
Printing cannot be performed using the network
interface.
Click
Advanced
on the PostScript sheet of the printer’s Properties,
then change the Data Format setting from
ASCII
data (default) to
TBCP
(Tagged binary communications protocol).
When the
Binary
setting is set to
On
, TBCP is not available. Use the
Binary protocol. See
An undefined error occurs (Mac OS only)
Cause
What to do
The version of the Mac OS that you are using is
unsupported.
This printer’s driver can only be used on Mac OS computers running
Mac OS X version 10.6.8 or later.
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Troubleshooting
97