Important Instructions
Important Safety
Instructions
Setting up the printer
❏
Be sure to lift the printer by the correct positions as
shown below.
❏
When moving the printer, always keep it
horizontal.
❏
If you are unable to insert the AC plug into the
electrical outlet, contact an electrician.
❏
Do not connect to an uninterruptible power source.
If you connect to one, it may cause malfunctions or
damage.
❏
Be sure the AC power cord meets the relevant local
safety standards. Use only the power cord that
comes with this product. Use of another cord may
result in fire or electric shock. This product’s power
cord is for use with this product only. Use with
other equipment may result in fire or electric shock.
❏
If damage occurs to the plug, replace the cord set or
consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of
the correct size and rating.
❏
Use a grounded outlet that matches the printer’s
power plug. Do not use an adapter plug.
❏
Avoid using an electrical outlet that is controlled by
wall switches or automatic timers. Accidental
disruption of power can erase valuable information
in your computer’s and printer’s memory.
❏
Make sure that there is no dust on the socket.
❏
Be sure to insert the plug completely into the
electrical outlet.
❏
Do not handle the plug with wet hands.
❏
Unplug this printer from the wall outlet and refer
servicing to a qualified service representative under
the following conditions:
A.
When the power cord or plug is damaged or
frayed.
B.
If liquid has been spilled into it.
C.
If it has been exposed to rain or water.
D.
If it does not operate normally when the
operating instructions are followed. Adjust
only those controls that are covered by the
operating instructions since improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
product to normal operation.
E.
If it has been dropped or the cabinet has
been damaged.
F.
If it exhibits a distinct change in
performance, indicating a need for service.
❏
Avoid sharing outlets with other appliances.
❏
Connect all equipment to properly grounded
power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that
regularly switch on and off.
❏
Connect your printer to an electrical outlet that
meets the power requirements of this printer. Your
printer’s power requirements are indicated on a
label attached to the printer. If you are not sure of
the power supply specifications in your area,
contact your local power company or consult your
dealer.
❏
If you use an extension cord, make sure that the
total of the ampere ratings on the products plugged
into the extension cord does not exceed the
extension cord ampere rating.
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Important Instructions
7
