manualshive.com logo in svg

Epson AL-M200 Series, User Manual

The Epson AL-M200 Series user manual is a comprehensive guide designed to assist users in maximizing their experience with this top-notch printer. With easy-to-follow instructions and in-depth explanations, this manual is a valuable resource for troubleshooting and maintenance. Download it for free from our website, manualshive.com, and unleash the full potential of your Epson AL-M200 Series.

Share
Download
background image

Network Connection Setup

Note:

❏

To use your printer in a Linux environment, you need to install print drivers for the Linux operating
systems. For details on how to install and use the drivers, see also “Installing Print Drivers on
Computers Running Linux (CUPS)” on page 89.

❏

When using a CD drive in a Linux environment, you need to mount the drive to your system
environment. The command strings are mount/media/CD-ROM.

The following procedure uses Windows 7 as an example.

1. Click 

Easy Install

.

The 

SOFTWARE LICENSE AGREEMENT

 appears.

2. If you agree to the terms of the 

SOFTWARE LICENSE AGREEMENT

, select 

Agree

 and then click

Next

.

Easy Install Navi

 launches.

3. Click 

Installing Drivers and Software

.

4. Select 

Network Installation

, and then click 

Next

.

5. Select the printer you want to install from the printer list, and then click 

Next

. If the target printer

is not displayed on the list, click 

Refresh

 to refresh the list or click 

Add Printer

 to add a printer to

the list manually. You may specify the IP address and port name at this point.

If you have installed this printer on the server computer, select 

I am setting up this printer on a

server

 check box.

Note:

If the installer displays 

0.0.0.0

 when you intend to use the AutoIP feature, you must enter a valid IP

address to continue.

6. Specify the printer settings, and then click 

Next

.

a Enter the printer name.

b If you want other users on the network to access this printer, select 

Share this printer with

other computers on the network

, and then enter a share name that users can identify.

AL-M200 Series     User’s Guide

Printer Connection and Software Installation     

39

Summary of Contents for AL-M200 Series









































































































































































































































Reviews:

No comments

Related manuals for AL-M200 Series

Canon IMAGERUNNER ADVANCE C5051 Quick Reference preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 72
Canon iPF710 - imagePROGRAF Color Inkjet Printer Manual preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 92
Canon iPF8000S - imagePROGRAF Color Inkjet Printer Brochure preview
iPF8000S - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 8
Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions preview
imageRUNNER ADVANCE C9075S PRO
Brand: Canon Pages: 48
Canon Two-Knife Booklet Trimmer-A1 User Manual preview
Two-Knife Booklet Trimmer-A1
Brand: Canon Pages: 32
Oce Perfect Binder-C1 User Manual preview
Perfect Binder-C1
Brand: Oce Pages: 82
Canon IMAGERUNNER 7095 PRINTER Service Manual preview
IMAGERUNNER 7095 PRINTER
Brand: Canon Pages: 615
Canon imageRUNNER C3125i User Manual preview
imageRUNNER C3125i
Brand: Canon Pages: 816
Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Brand: Canon Pages: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Brand: Canon Pages: 2
EasyThreed Mars Quick Start Manual preview
Mars
Brand: EasyThreed Pages: 15
Z Corporation Spectrum Z 510 Hardware Manual preview
Spectrum Z 510
Brand: Z Corporation Pages: 76
Canon iR6570 series Service Manual preview
iR6570 series
Brand: Canon Pages: 684
AGFA Drystar 5500 Reference Manual preview
Drystar 5500
Brand: AGFA Pages: 266
Felix printers FELIX Pro 3 Touch Quick Start Manual preview
FELIX Pro 3 Touch
Brand: Felix printers Pages: 29
Oki ML3320 User Manual preview
ML3320
Brand: Oki Pages: 57
Jolimark TP830 Series User Manual preview
TP830 Series
Brand: Jolimark Pages: 65

Brands by name

Popular brands

Load more brands