Epson AL-M200 Series User Manual Download Page 144

Page: 144 / 232

Error History

Purpose:

To print a detailed list of paper jams and fatal errors.

PCL Fonts List

Purpose:

To print a sample of available PCL fonts.

PS Fonts List

Purpose:

To print a sample of available PostScript Level3 Compatible and PDF fonts.

Meter Readings

Use

Meter Readings

to check the total number of printed pages.

Admin Menu

Use the

Admin Menu

to configure a variety of printer features.

Note:

A password is required to use the

Admin Menu

when

Panel Lock Set

is set to

Enable

. In this case,

enter the password you specified, and press the

button.

Network

Use the

Network

option to change the printer settings affecting jobs sent to the printer through the

network.

Ethernet

Purpose:

To specify the communication speed and the duplex settings of Ethernet. To make any changes
effective, turn off the printer and then turn it back on.

Values:

AL-M200 Series User’s Guide

Using the Operator Panel Menus

144

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Brands by name

Popular brands

Epson AL-M200 Series, User Manual

Search results

Summary of Contents for AL-M200 Series

Reviews:

Brands by name

Popular brands