manualshive.com logo in svg

Epson AL-M200 Series, User Manual

Share
Download
Epson AL-M200 Series User Manual Download Page 121

Before printing a long length document, be sure to open the output tray extension.

Setting Paper Sizes and Types

When loading print media, set the paper size and type on the operator panel before printing.

This section describes how to set the paper size and type on the operator panel.

See Also:

“Understanding the Operator Panel Menus” on page 143

Setting Paper Sizes

1. Press the 

 (

Menu

) button.

2. Select 

Tray Settings

, and then press the   button.

3. Select 

Tray

, and then press the   button.

4. Select 

Paper Size

, and then press the   button.

5. Select the correct paper size for the print media loaded, and then press the   button.

AL-M200 Series     User’s Guide

Printing Basics     

121

Summary of Contents for AL-M200 Series









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands