Epson AL-M200 Series User Manual Download Page 115

Page: 115 / 232

Loading W-Postcards

Load W-postcards with the print surface facing up and the left edge first.

Note:

To confirm the correct orientation of each print media such as postcards, see the instructions on the

Envelope/Paper Setup Navigator

dialog box of the print driver.

Loading Print Media in the Priority Sheet Inserter (PSI)

Note:

❏

Before you use the Priority Sheet Inserter (PSI), make sure that the printer has the paper tray
inserted.

❏

Use only laser print media. Do not use ink jet paper on your printer.

❏

For manually loading print media for duplex (2-sided) printing, see “Manual Duplex Printing (PCL
Print Driver Only)” on page 125.

1. Open the front cover.

AL-M200 Series User’s Guide

Printing Basics

115

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Epson AL-M200 Series, User Manual, Page: 115 / 232

Search results

Summary of Contents for AL-M200 Series

Reviews: