Epson AL-M200 Series Page 106 User Manual Download

Page: 106 / 232

Capacity

The paper tray can accommodate:

❏

250 sheets of standard paper

❏

27.5 mm (1.08 inches) of thick paper

❏

27.5 mm (1.08 inches) of postcards

❏

Ten envelopes

❏

Twenty labels

The Priority Sheet Inserter (PSI) can accommodate:

❏

10 sheets of plain paper or one sheet of lightweight cardstock paper

Print Media Dimensions

The paper tray can accommodate print media within the following dimensions:

❏

Width: 76.2 - 215.9 mm (3.00 - 8.50 inches)

❏

Length: 127.0 - 355.6 mm (5.00 - 14.00 inches)

The Priority Sheet Inserter (PSI) can accommodate print media within the following dimensions:

❏

Width: 76.2 - 215.9 mm (3.0 - 8.50 inches)

❏

Length: 210.0 - 355.6 mm (8.20 - 14.00 inches)

Loading Print Media in the Paper Tray

Note:

❏

When you are printing on any print media that is smaller than the A5 size paper, be sure to load it in
the paper tray.

❏

To avoid paper jams, do not remove the paper tray while printing is in progress.

❏

Use only laser print media. Do not use ink jet paper on your printer.

AL-M200 Series User’s Guide

Printing Basics

106

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands

Epson AL-M200 Series, User Manual

Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands