manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

Share
Download
Epson AcuLaser MX20 Series User Manual Download Page 50

Setting your originals into the Auto Document Feeder

Follow the steps below to load documents in the Auto Document Feeder.

1. Slide the edge guides all the way outward.

2. Insert a stack of documents face-up in the Auto Document Feeder until it meets resistance, and

then move the edge guides so they are flush with the edges of your documents.

3. Raise the stopper.

Note:

❏

Make sure the ADF cover is closed firmly. If the ADF cover is open, the document table is
preemptively scanned and a blank copy is output even if an original is set in the Auto Document
Feeder.

❏

If you load multiple pages in the Auto Document Feeder, the pages will be fed from the top and then
ejected face-down.

Epson AcuLaser MX21/MX20 Series     User's Guide

Paper Handling     

50

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands