manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

The Epson AcuLaser MX20 Series User Manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions on how to set up, operate, and troubleshoot your Epson AcuLaser MX20 printer. Get the most out of your printer with this essential manual at your fingertips.

Share
Download
background image

Printer software installation

Incorrect or incomplete software installation can lead to USB problems. Take note of the following
and perform the recommended checks to ensure proper installation.

Checking printer software installation

When using Windows 7, 7 x64, Vista, Vista x64, XP, XP x64, 2000, Server 2008, Server 2008 x64, Server
2003, or Server 2003 x64, you must follow the steps in the 

Setup Guide

 packed with the printer to install

the printer software. Otherwise, Microsoft’s Universal driver may be installed instead. To check if the
Universal driver has been installed, follow the steps below.

1. Open the 

Printers

 folder, then right-click the icon of your printer.

2. Click 

Printing Preferences

 on the shortcut menu that appears, then right-click anywhere in the

driver.

If About is displayed in the shortcut menu that appears, click it. If a message box with the words
“Unidrv Printer Driver” appears, you must reinstall the printer software as described in the 

Setup

Guide

. If About is not displayed, the printer software has been installed correctly.

Note:

❏

For Windows 2000, if the Digital Signature Not Found dialog box appears during the installation
process, click 

Yes

. If you click 

No

, you will have to install the printer software again.

❏

For Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64, if the Software
Installation dialog box appears during the installation process, click 

Continue Anyway

. If you click

STOP Installation

, you will have to install the printer software again.

❏

For Windows 7, 7 x64, Server 2008, or Server 2008 x64, if the Windows Security dialog box appears
during the installation process, click 

Install this driver software anyway

. If you click 

Don’t install

this driver software

, you will have to install the printer software again.

Status and Error Messages

You can see the printer’s status and error messages on the LCD panel. For more information, see
“Status and Error Messages” on page 172.

Epson AcuLaser MX21/MX20 Series     User's Guide

Troubleshooting     

237

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Related manuals for AcuLaser MX20 Series

Samsung SPP 2020 - Photo Printer - 20 Sheets Manual Del Usuario preview
SPP 2020 - Photo Printer - 20 Sheets
Brand: Samsung Pages: 81
Samsung ML-6000 Bedienungsanleitung preview
ML-6000
Brand: Samsung Pages: 98
Samsung ML-4050N Compatibility Manual preview
ML-4050N
Brand: Samsung Pages: 6
Samsung ML-3750ND User Manual preview
ML-3750ND
Brand: Samsung Pages: 203
Samsung ML-3312ND Manual Del Usuario preview
ML-3312ND
Brand: Samsung Pages: 264
Samsung ML-2165W/XAA Manual Del Usuario preview
ML-2165W/XAA
Brand: Samsung Pages: 228
Samsung ML-2165 User Manual preview
ML-2165
Brand: Samsung Pages: 211
Samsung ML-2525 Brochure & Specs preview
ML-2525
Brand: Samsung Pages: 5
Samsung ML-1865W Manual Del Usuario preview
ML-1865W
Brand: Samsung Pages: 92
Samsung ML-1865W User Manual preview
ML-1865W
Brand: Samsung Pages: 75
Samsung ML-6060 Technical Instructions preview
ML-6060
Brand: Samsung Pages: 11
Samsung ML-1450 Series Manual Del Usuario preview
ML-1450 Series
Brand: Samsung Pages: 206
Samsung ML 3050 - B/W Laser Printer Manual Del Usuario preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 103
Samsung ML 3050 - B/W Laser Printer User Manual preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 215
Samsung ML-1450 Series Quick Manual preview
ML-1450 Series
Brand: Samsung Pages: 2
Samsung CLP 510N - Color Laser Printer User Manual preview
CLP 510N - Color Laser Printer
Brand: Samsung Pages: 266
Samsung 550N - CLP Color Laser Printer Manual De Instalación preview
550N - CLP Color Laser Printer
Brand: Samsung Pages: 296
Samsung CLP-415NW User Manual preview
CLP-415NW
Brand: Samsung Pages: 276

Brands by name

Popular brands

Load more brands