manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

Share
Download
Epson AcuLaser MX20 Series User Manual Download Page 167

Fit to Page

When 

On

 is selected, faxes that do not match the size of the paper for printing faxes are reduced to fit

the paper that is available. If 

Off

 is selected, any part that does not fit within the page may be erased.

Fax Output

Specifies where to save the received data.

Fax to Folder Settings

Specifies a shared folder path, user name, and password for the destination. Also tests the connection.

E-mail Settings

Specifies the e-mail address, the maximum size of e-mail attachments, and the e-mail subject. Also
tests the connection.

Memory Reception

When 

On

 is selected, received data is stored in the printer’s memory without being printed. You can set

when memory reception starts and stops.

 Communication Settings

Item

Settings (default in bold)

Comm. Report

AOutput, Activity Only, 

Off

Send Report

On

, Error Only, Off

Multi Send Report

On, Error Only, 

Off

Comm. Report

Specifies settings for the communication report. When 

AOutput

 or 

Activity Only

 is

selected, a report is automatically printed every 50 communications, including both sending and
receiving.

Epson AcuLaser MX21/MX20 Series     User's Guide

Using the Control Panel     

167

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands