Checking Page Counts
The total number of printed pages can be checked by printing a System Settings page. The total
number of printed pages is shown on the Print Volume section, classified by paper sizes.
Single side print (including Multiple Up) is counted as one job, and 2-sided print (including Multiple
Up) is counted as two. During 2-sided printing, if an error occurs after one side is printed properly, it is
counted as one.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page. However, when doing 2-sided
printing for odd number of pages, the blank page inserted to the rear side of the last odd page is not
counted.
Note:
Refer to “Printing a System Settings Page” on page 108 for details on how to print a System Settings
page.
Moving the Printer
1. Turn off the printer.
2. For the Epson AcuLaser MX14NF, disconnect the power cord, interface cable, and any other
cables.
Epson AcuLaser MX14 Series User’s Guide
Maintenance
314
