manualshive.com logo in svg

Epson AcuLaser MX14, User Manual, Page: 215 / 333

Share
Download
Epson AcuLaser MX14 User Manual Download Page 215

Dialing Type

Purpose:

To select the dialing type.

Values:

Tone

*

Sets the dialing type to 

Tone

.

DP (10PPS)

Sets the dialing type to Dial Pulse (10 pulse per second).

DP (20PPS)

Sets the dialing type to Dial Pulse (20 pulse per second).

Note:

❏

This menu is not displayed when 

Region

 is set to 

South Africa

.

❏

The available values vary depending on the region selected for 

Region

.

Interval Timer

Purpose:

To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is eight seconds.

Number of Redial

Purpose:

To specify the number of redial attempts to make when the destination fax number is busy, within the
range of 0 to 9. If you enter 

0

, the printer will not redial. The default is 3.

Redial Delay

Purpose:

To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is one
minute.

Junk Fax Filter

Purpose:

To reject faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered
in the Address Book.

Epson AcuLaser MX14 Series     User’s Guide

Using the Operator Panel Menus and Keypad     

215

Summary of Contents for AcuLaser MX14














































































































































































































































































































































Reviews:

No comments