Note:
Values marked by an asterisk (*) are the factory default menu settings.
Lighter2
Makes the fax lighter than the original. Works well with dark print.
Lighter1
Normal
*
Works well with standard typed or printed documents.
Darker1
Makes the fax darker than the original. Works well with light print or faint pencil
markings.
Darker2
Inserting a Pause
For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A
pause must be entered in order for the access code to function. For example, enter the access code 9
and then press the
Redial/Pause
button before entering the telephone number. “-” appears on the
LCD panel to indicate when a pause is entered.
Sending a Fax Automatically
1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See Also:
❏
“Loading an Original Document on the ADF” on page 176
❏
“Loading an Original Document on the Document Glass” on page 177
2. Press the
(
Fax
) button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏
❏
4. You can select a fax number in one of the following ways:
Epson AcuLaser MX14 Series User’s Guide
Faxing (Epson AcuLaser MX14NF Only)
180
