Configuring the Printer Settings
You can configure the printer settings to use the Scan to Server/Computer feature with the EpsonNet
Config or Address Book Editor.
The following procedure uses Windows XP as an example.
From the EpsonNet Config
1. Launch your web browser.
2. Enter the IP address of the printer in the address bar, and then press the
Enter
key.
The printer’s web page appears.
Note:
For details on how to check the IP address of the printer, see “Verifying the IP Settings” on
page 47.
3. Click the
Address Book
tab.
If user name and password are required, enter the correct user name and password.
Epson AcuLaser MX14 Series User’s Guide
Scanning
155