AcuLaser M4000 Series
User's Guide
Printing Tasks
51
After you install EPSON Web-To-Page, the menu bar is displayed on the Microsoft Internet
Explorer Toolbar. If it does not appear, select
Toolbars
from the View menu of Internet Explorer,
and then select
EPSON Web-To-Page
.
Using the Reserve Job Function
This function allows you to store print jobs on the printer’s memory and to print them later directly
from the printer’s control panel. You can prevent the printed document from being looked at by
other people by applying a password to the print job.
This function uses the following types of printer memory.
The table below gives an overview of the Reserve Job options.
*
Not available when you use the RAM disk for the printer’s memory.
Printer’s Memory
Description
Hard Disk Drive
The optional Hard Disk Drive must be installed on your printer in order to use the
Reserve Job function. Make sure that the drive is correctly recognized by the
printer driver before you start using the Reserve Job function.
RAM disk
You need to keep sufficient RAM disk capacity in order to use the Reserve Job
function. To enable the RAM disk, you have to set the RAM Disk setting on the
control panel to Normal or Maximum. For instructions about increasing your
printer’s memory, see “Installing a memory module” on page 106. After the
memory module is installed, you must update the option information. See “Making
Optional Settings” on page 173.
Reserve Job Option
Description
Re-Print Job
Lets you print the job now and store it on the printer’s memory. You can print the
same job several times.
Verify Job
Lets you print one copy now to verify the content. You can print multiple copies
later.
Stored Job
*
Lets you store the print job on the printer’s memory without printing it now.
Confidential Job
Lets you apply a password to the print job. You can print the job entering the
password on the printer’s control panel.
