Epson Aculaser M2300 Series User Manual Download Page 115

Page: 115 / 167

Cause

What to do

For

Windows

users only

The print data is too large.

Click

Advanced

on the PostScript sheet of the printer’s Properties,

then change the Data Format setting from ASCII data (default) to
TBCP (Tagged binary communications protocol).

When the

Binary

setting is set to

, TBCP is not available. Use the

Binary protocol. For details about setting, see the Network Guide.

For

Windows

users only

Printing cannot be performed using the network
interface.

Click

Advanced

on the PostScript sheet of the printer’s Properties,

then change the setting from ASCII data (default) to TBCP (Tagged
binary communications protocol).

When the

Binary

setting is set to

, TBCP is not available. Use the

Binary protocol. For details about setting, see the Network Guide.

An undefined error occurs (Macintosh only)

Cause

What to do

The version of the Mac OS that you are using is
unsupported.

This printer’s driver can only be used on Macintosh computers
running Mac OS X version 10.4.11 or later.

Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide

Troubleshooting

115

Summary of Contents for Aculaser M2300 Series








































































































































































Search results

Summary of Contents for Aculaser M2300 Series

Reviews:

Related manuals for Aculaser M2300 Series

Brands by name

Popular brands

Epson Aculaser M2300 Series, User Manual

Search results

Summary of Contents for Aculaser M2300 Series

Reviews:

Related manuals for Aculaser M2300 Series

Brands by name

Popular brands