manualshive.com logo in svg

Epson Aculaser M2000 series, User Manual, Page: 30 / 169

Share
Download
Epson Aculaser M2000 series User Manual Download Page 30

Printing Tasks

30

Note:

Since the quality of any particular brand or type of media may be changed by the manufacturer at any time, 
EPSON cannot guarantee the quality of any type of media. Always test samples of media stock before 
purchasing large quantities or printing large jobs.

Labels

Available labels:

❏

Labels designed for laser printers or plain-paper copiers

❏

Labels that completely cover the backing sheet, with no gaps between the individual labels

Available paper source:

❏

MP tray

Printer driver settings:

Note:

❏

Depending on the quality of labels, the printing environment, or the printing procedure, labels might be 
wrinkled. Make a trial print run before you print on a lot of labels.

❏

Duplex printing is not available for labels.

❏

Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels in your 
printer.

Envelopes

Available envelopes:

❏

Envelopes that have no glue or no tape

c

Cautions

Do not use any window envelope other than the ones designed for laser printers. The plastic on most 
window envelopes will melt.

Paper Size:

A4, LT

Paper Source:

MP tray

Paper Type:

Labels

Summary of Contents for Aculaser M2000 series










































































































































































Reviews:

No comments