Epson Aculaser M2000 series User Manual Download Page 148

Page: 148 / 169

About the PostScript Printer Driver

148

Note for IP Printing users, USB or Bonjour (Rendezvous) users:

Select your printer from the Printer list, then select

Show Info

from the Printers menu. The Printer Info

dialog box appears. Select

Installable Options

from the pop-up list, then make the necessary settings.

6. Confirm that your printer’s name is added to the Printer List. Then quit

Printer Setup Utility

(for Mac OS X 10.3 and 10.4) or

Print Center

(for Mac OS X 10.2).

Accessing the PostScript printer driver

You can change the PostScript printer driver settings in the PostScript printer driver. To access the
printer driver, see “Accessing the printer driver” on page 134.

Changing the printer setup settings

You can change or update the printer setup settings according to the options installed in your
printer.

Note for Mac OS X users:

When

Super

is selected as the resolution, the following functions in the printer driver cannot be used.

For Mac OS X users

1. Access the printer driver. The Printer List window appears.

2. Select the printer from the list.

3. Select

Show Info

from the Printers menu. The Printer Info dialog box appears.

4. Make necessary changes to the settings, then close the dialog box.

5. Quit

Printer Setup Utility

(for Mac OS X 10.3 and 10.4) or

Print Center

(for Mac OS X 10.2).

RITech:

Summary of Contents for Aculaser M2000 series










































































































































































Search results

Summary of Contents for Aculaser M2000 series

Reviews:

Related manuals for Aculaser M2000 series

Brands by name

Popular brands

Epson Aculaser M2000 series, User Manual

Search results

Summary of Contents for Aculaser M2000 series

Reviews:

Related manuals for Aculaser M2000 series

Brands by name

Popular brands