Note:
❏
The name of the shared printer may be changed by the computer or server that is connected
to the shared printer. To make sure of the name of the shared printer, ask the administrator
of the network.
❏
If the printer driver is installed in the client beforehand, you need to select either the new
printer driver or the current printer driver. When the prompt to select the printer driver
appears, select the printer driver according to the message.
❏
If the additional driver for the corresponding Windows is installed in the print server, go to
the next step.
6. Select whether to use the printer as the default printer or not, then click
Next
.
7. Make sure of the settings, then click
Finish
.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the clients when setting the network
system without installing the additional drivers in the print server.
The on-screen displays on the following pages may differ depending on the version of Windows OS.
Note:
❏
When installing in Windows XP, XP x64, or 2000 clients, you must access Windows XP, XP x64,
or 2000 as the Administrator.
❏
For Windows Vista or Vista x64, even if you are not an administrator or power user, you can
install the printer driver by clicking
Continue
when the prompt to continue the installation appears.
EPSON AcuLaser M1200 Series User’s Guide
Setting Up Your Printer on a Network (AcuLaser M1200)
66
