Epson Aculaser M1200 series User Manual Download Page 45

Page: 45 / 139

Double-click the printer icon on the task bar. Select the task in the list, then click

Cancel

from

under the Document menu.

After the last page is output, the Ready light on the printer turns on.

The current job is canceled.

Cancelling from the EPSON Status Monitor 3 window (AcuLaser M1200/EPL-6200L)

You can cancel printing from EPSON Status Monitor 3.

Note:

EPSON Status Monitor 3 is automatically installed together with the printer driver. To be able to
cancel printing from EPSON Status Monitor 3 with the EPL-6200, make sure that you install it.

Open the printer driver, then click the

Utility

tab. Click the

EPSON Status Monitor 3

button,

then click the

Cancel Printing

button.

Uninstalling Printer Software

When you wish to reinstall or upgrade the printer driver, be sure to uninstall the current printer
software beforehand.

Uninstalling the printer driver and EPSON Status Monitor 3

Follow these steps to uninstall the printer driver and EPSON Status Monitor 3:

EPSON AcuLaser M1200 Series User’s Guide

Using the Printer Driver For Windows

Summary of Contents for Aculaser M1200 series












































































































































Search results

Summary of Contents for Aculaser M1200 series

Reviews:

Related manuals for Aculaser M1200 series

Brands by name

Popular brands

Epson Aculaser M1200 series, User Manual

Search results

Summary of Contents for Aculaser M1200 series

Reviews:

Related manuals for Aculaser M1200 series

Brands by name

Popular brands