Epson Aculaser M1200 series User Manual Download Page 23

Page: 23 / 139

❏

The printer is extremely sensitive to moisture. Be sure to store your paper in a dry environment.

❏

The use of colored paper is acceptable, but coated paper should be avoided.

❏

You may use paper with preprinted letterheads, provided that the paper and ink are both
laser-printer compatible.

MP tray

The MP tray is the standard paper source for this product.

AcuLaser M1200/EPL-6200L

You can load up to 150 sheets of plain paper into the MP tray of the AcuLaser M1200/EPL-6200L.

Follow these steps to load paper into the MP tray:

1. Open the MP tray.

2. Pinch the paper guide tab, then slide the paper guide outward to accommodate the paper you

are loading.

EPSON AcuLaser M1200 Series User’s Guide

Paper Handling

Summary of Contents for Aculaser M1200 series












































































































































Search results

Summary of Contents for Aculaser M1200 series

Reviews:

Related manuals for Aculaser M1200 series

Brands by name

Popular brands

Epson Aculaser M1200 series, User Manual

Search results

Summary of Contents for Aculaser M1200 series

Reviews:

Related manuals for Aculaser M1200 series

Brands by name

Popular brands