5. Press the
Start
key.
The document is scanned, and then the fax is sent.
Note:
❏
To stop the transmission, press the
Stop/Reset
key. A message appears, requesting confirmation
to cancel the setting. Select
YES
, and then press the
Select
key. If this is done, all selected
recipients are cleared.
❏
If
FAX TX
in
ADMIN. MANAGEMENT
/
PASSWORD SETTING
/
FULL FUNC. NO.
has been
restricted, type in the number specified for
FULL FUNC. NO.
after pressing the
Start
key.
Sending a Fax to Multiple Recipients (Group Dial)
Multiple destinations can be selected with a group dial destination.
Note:
Multiple destinations must have been previously registered with a group dial destination. For details,
refer to “Registering a Group Dial Destination” on page 64.
1. Press the
Addressbook
key 3 times.
Note:
The
Addressbook
key can be used if the main screen or
Can Use AddressBook
is displayed.
2. Use the keypad to type in the group dial number (1-20), and then press the
Select
key.
Note:
❏
If a number was incorrectly entered, press the
Back
key, and then type in the correct number of
the group dial destination.
❏
If the entered group dial number is not registered with a fax number, the message
NOT FAX NO.
appears. In addition, if the entered group dial number is not registered with a recipient, the
message
NOT REGISTERED!
appears. Enter a group dial number registered with a fax number.
3. When
OK=Select
appears, press the
Select
key again.
4. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To erase the selected destinations, press the
Stop/Reset
key.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
34
