Specifying Settings in UTILITY Menu
General Procedure for Specifying Settings in UTILITY Menu
1. Press the
u
or
d
key to select
UTILITY
, and then press the
Select
key.
2. Press the
u
or
d
key to select the desired menu, and then press the
Select
key to display the
selected menu.
Note:
Refer to the menu configuration on “UTILITY Menu” on page 14 to display the desired menu.
3. To select a setting, press the
u
,
d
, lor rkey.
To enter a setting, use the keypad to type in the number.
4. Press the
Select
key.
The setting is applied.
Note:
To cancel the settings, press the
Back
key.
Memory Reception
Received faxes can be stored in the memory and printed at a specified time. This is convenient, for
example, when confidential documents are received.
Memory reception can be used with the following settings.
❏
Start/end time settings: Not set
MEMORY RX MODE
function is normally set to
ON
. To print a fax
saved in memory, set
MEMORY RX MODE
function to
OFF
.
❏
Start/end time settings: Set memory reception mode begins and ends at the specified time.
Example 1: When
ON TIME
setting is set to 18:00 and
OFF TIME
setting is set to 8:00
The machine is in memory reception mode from 18:00 to 8:00 and in normal reception mode,
where faxes are printed after being received, from 8:00 to 18:00.
Example 2: When
ON TIME
setting is set to 12:00 and
OFF TIME
setting is set to 12:00 (the start time
and end time are the same)
Epson AcuLaser CX37DNF Facsimile User’s Guide
Control Panel and Configuration Menu
19
