manualshive.com logo in svg

Epson aculaser cx37 series, User Manual, Page: 235 / 261

Share
Download
Epson aculaser cx37 series User Manual Download Page 235

This message...

means...

Do this...

USB MEMORY FULL

There is no space available on the
USB memory device connected
to this machine.

Delete data from the USB memory
device to create free space, or use a
different USB memory device.

Waste Near Full

The waste toner bottle will soon
be full.

Prepare a waste toner bottle.

WASTE TONER FULL

 

REPLACE BOTTLE

The waste toner bottle is full.

Replace the waste toner bottle.

WRONG PASSWORD

 

xxx

The password is incorrect, so the
indicated server could not be
accessed.

Check the password, and then specify
the correct one.

xxx COVER OPEN

 

CLOSE xxx COVER

The indicated cover is open.

Close the indicated cover.

xxx DOOR OPEN

 

CLOSE xxx DOOR

The indicated door is open.

Close the indicated door.

xxx IS DISABLED

The 

TCP/IP

, 

FTP

, 

SMTP

 or 

SMB

settings are disabled.

Enable the 

TCP/IP

, 

FTP

, 

SMTP

 or 

SMB

settings.

xxx SERVER ERROR

The file cannot be saved on the
indicated server.

Check the status of the indicated
server.

Service Messages

These messages indicate a more serious fault that can only be corrected by a customer service engineer.
If one of these messages appears, turn the machine off, then turn it on again. If the problem persists,
contact your local vendor or authorized service provider.

This service message...

means...

Do this...

MACHINE TROUBLE

 

SERVICE CALL (xxxx)

An error has been detected with the
item indicated “

XXXX

” in the service

message.

Reboot the machine. This often clears
the service message, and machine
operation can resume.

If the problem persists, contact
Technical Support.

Epson AcuLaser CX37 Series     Printer/Copier/Scanner User’s Guide

Troubleshooting     

235

Summary of Contents for aculaser cx37 series






































































































































































































































































Reviews:

No comments