Epson AcuLaser CX28 Series Reference Manual Download Page 59

Page: 59 / 328

Specifying Page Setup Settings

Page Attributes Options

The

Page Attributes

section is used to specify the settings for the paper

size, scaling, and print orientation.

Paper Size
Select the desired paper size from the Paper Size pop-up menu.

Orientation
Select either a vertical or horizontal page orientation for printouts.

Scale
If you want to enlarge or reduce the size of the printout, enter the scale
ratio here (25-400%).

Regardless of which paper size is selected, the machine does not
print within 0.165" (4.2 mm) of the edge of the paper.

Summary of Contents for AcuLaser CX28 Series









































































































































































































































































































































Search results

Summary of Contents for AcuLaser CX28 Series

Reviews:

Related manuals for AcuLaser CX28 Series

Brands by name

Popular brands

Epson AcuLaser CX28 Series, Reference Manual

Search results

Summary of Contents for AcuLaser CX28 Series

Reviews:

Related manuals for AcuLaser CX28 Series

Brands by name

Popular brands