Epson Aculaser CX21N Series, User Manual

Page: 199 / 401

Copying 199
❏
When you place multiple documents in the Auto Document Feeder and make a continuous
high quality (600 dpi) color copy with the default memory (128 MB), the product may not
work properly because of insufficient memory. We recommend adding an memory module
so that the total memory size is 256 MB or higher.
Canceling Copying
When the
y
Cancel button on the control panel is pressed while a document is being
copied in copy mode, the LCD panel shows
Cancel Print Job
and the copy job is
canceled.
Making Changes to Copy Settings
When you plan to copy your document using other than the default settings, you can make
changes to the appropriate copy settings as follows. Use the
u
Up or
d
Down button to
move between menu items.
Changing the number of copies
You can specify the number of copies by selecting a value from 1 to 99. The default setting
is 1.
1. Make sure that the product is in Copy mode. If not, press the Copy button to enter
the Copy mode.
2. Make sure the value next to
Copies
is highlighted in the LCD panel, and then enter the
number of copies to be made using the numeric keypad.
Note:
You can also use the
r
Right or
l
Left button to increase or decrease the number, one digit at
a time.
Selecting the paper
You can specify the type and size of paper to be loaded in the MP tray or the optional paper
cassette.
Available paper sources:
❏
The available paper types for copying are not the same as that for printing. Depending on the
paper source, available paper types differ. When copying originals, you can only use the
following paper types.