Epson Aculaser CX16NF User Manual Download

Page: 92 / 213

❏

AutoCrop icon

Click to automatically detect the scanning position based on the preview image.

❏

Zoom icon

Click to rescan the area selected in the preview window and enlarge it to fit the window.

❏

Mirror icon

Click to display a mirror image of the preview image.

❏

Tone Reversal icon

Click to reverse the colors of the preview image.

❏

Clear icon

Click to erase the preview image.

❏

Preview window

Displays a preview image. Drag the rectangle over the image to select an area.

❏

Before/After (RGB)

Move the pointer in the preview window to display the color tones at the pointer’s position before and
after adjustments.

❏

Width/Height

Displays the width and height for the selected area in the selected measurement units.

Windows WIA Driver Settings

❏

Paper source (AcuLaser CX16NF only)

Select whether documents are placed on the original glass or loaded into the ADF.

❏

Color picture

Select this setting when scanning in color.

❏

Grayscale picture

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Using the Scanner

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands