Epson Aculaser CX16NF User Manual Download

Page: 90 / 213

Note:

For details on positioning the document, refer to “Placing a document on the original glass” on page
69 and “Loading a document into the ADF (AcuLaser CX16NF only)” on page 71.

2. Start the application to be used for scanning.

3. Start the scanner driver according to the application settings.

4. Specify the necessary scanner driver settings.

5. Click the

Scan

button in the scanner driver.

Windows TWAIN Driver Settings

❏

Load

Load a saved settings file (dat file) for scanning.

❏

Save

Save the current settings as a settings file (dat file).

❏

Default

Return all settings to their defaults.

❏

Help icon

Click to display the Help.

❏

About icon

Click to display the software version information.

❏

Paper source (AcuLaser CX16NF only)

Select whether documents are placed on the original glass or loaded into the ADF.

❏

Original Size

Specify the original size.

❏

Scan Type

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Using the Scanner

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands