Note:
Changes made with this procedure will not be applied to the original data (speed dial destination, group
dial destination, etc.).
1. In the main screen (Scan mode), press the
u
or
d
key to select
UTILITY
, and then press the
Select
key.
2. Press the
u
or
d
key to select
DIAL REGISTER
, and then press the
Select
key.
3. Press the
u
or
d
key to select
FAVORITE
, and then press the
Select
key.
4. Press the
u
or
d
key to select
CHECK/EDIT
, and then press the
Select
key.
5. Press the
u
or
d
key to select the address to be deleted from the favorite list, and then press the
Stop/Reset
key.
6. Press the
u
or
d
key to select
YES
, and then press
Select
key.
The selected address is deleted.
7. To delete another address, repeat the procedure from step 5.
8. To finish deleting addresses, press the
Back
key.
9. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum of 250 speed dial
destinations can be registered.
Note:
❏
Machine key operations cannot be used to register an FTP address or SMB address as a speed dial
destination. These addresses can be registered with Local Setup Program or EpsonNet Config. For
details, refer to the Reference Guide.
❏
Speed dial destination numbers 221 to 250 are reserved for registering FTP addresses and SMB
address from Local Setup Program or EpsonNet Config.
1. In the main screen (Scan mode), press the
u
or
d
key to select
UTILITY
, and then press the
Select
key.
2. Press the
u
or
d
key to select
DIAL REGISTER
, and then press the
Select
key.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner
108
