Note:
For details on entering/editing text, refer to the Facsimile User’s Guide.
5. To finish editing addresses, press the
Back
key.
6. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB address) can be deleted.
Note:
Changes made with this procedure will not be applied to the original data (speed dial destination, group
dial destination, etc.).
1. In the main screen (Scan mode), press the
u
or
d
key to select the current data destination setting,
and then press the
Select
key.
2. To delete an e-mail address, press the
u
or
d
key to select
CHECK/EDIT
, and then press the
Select
key. Then, press the
u
or
d
key to select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3. Press the
Stop/Reset
key.
4. Press the
u
or
d
key to select
YES
, and then press the
Select
key.
The selected address is deleted.
Note:
If all specified addresses are deleted, the main screen is displayed.
5. To delete another address, repeat the procedure from step 2.
6. To finish deleting addresses, press the
Back
key.
7. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as speed dial destinations or as group dial
destinations.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner
106
