manualshive.com logo in svg

Epson AcuLaser CX11NF, Fax Manual

Share
Download
Epson AcuLaser CX11NF Fax Manual Download Page 47

Reports

47

Reports

6

You can print a variety of reports, including communication reports and lists of fax 
job information and fax settings. 

Printing Reports

You can print the following communication reports or a fax information list to check 
various transmission information and transmission results. 

1. Make sure the CX11NF is in Fax mode. If not, press the 

 

Fax

 button.

2. Press the 

Menu

 button.

3. Make sure 

Printing Report

 is selected, then press the 

r

 button.

4. Press the 

u

 or 

d

 button to select the report or list you want to print, then press the 

r

 button.

The report is printed.

Type of report

Description

Speed Dial List

Prints a list for one-touch dial, group dial, and speed 
dial information.

Activity Report

Prints a list of faxes sent and received.

Fax Settings List

Prints a list of Fax settings.

Memory Job Info

Prints job information stored in memory.

Summary of Contents for AcuLaser CX11NF

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands