Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable RAM
disk, you have to set the
RAM Disk
setting on the control panel to
Normal
or
Maximum
. We recommend
installing an optional memory to use this function. For instructions about increasing your printer’s
memory, see “Installing a memory module” on page 150.
Using the Quick Print Job Menu
Follow the steps below to print or delete Re-Print Job and Verify Job data.
1. Make sure the LCD panel displays
Ready
or
Sleep
, then press the
r
Enter
button to access the
control panel menus.
2. Press the
d
Down
button repeatedly until
Quick Print Job Menu
appears on the LCD panel,
then press the
r
Enter
button.
3. Use the
d
Down
or
u
Up
button to scroll to the appropriate user name, then press the
r
Enter
button.
4. Use the
d
Down
or
u
Up
button to scroll to the appropriate job name, then press the
r
Enter
button.
5. Press the
r
Enter
button, then use the
d
Down
and
u
Up
buttons to select the number of copies.
To delete the print job without printing any copies, press the
d
Down
button to display
Delete
on the LCD panel.
6. Press the
r
Enter
button to start printing or to delete the data.
Using the Confidential Job Menu
Follow the steps below to print or delete Confidential Job data.
1. Make sure the LCD panel displays
Ready
or
Sleep
, then press the
r
Enter
button to access the
control panel menus.
2. Press the
d
Down
button repeatedly until
ConfidentialJobMenu
appears on the LCD panel,
then press the
r
Enter
button.
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel
120
