Epson AcuLaser C8600 Reference Manual Download Page 363

Page: 363 / 415

Symbol Sets

361

Characters available with the ESC (^ command

To print the characters in the table below, use the ESC (^
command.

In the I239X Emulation Mode

The available symbol sets in the I239X mode are Pc437, Pc850,
Pc858, Pc860, Pc863, and Pc865. See “In the ESC/P2 or FX Modes”
on page 359.

The available fonts are EPSON Sans Serif, Courier SWC, EPSON
Prestige, EPSON Gothic, EPSON Presentor, EPSON Orator, and
EPSON Script.

Summary of Contents for AcuLaser C8600
































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C8600

Reviews:

Brands by name

Popular brands

Epson AcuLaser C8600, Reference Manual

Search results

Summary of Contents for AcuLaser C8600

Reviews:

Brands by name

Popular brands